Wednesday, December 25, 2019
When Bread Changed History The French Revolution
When Bread Changed History: The French Revolution Bread, the Christian Bible tells us, is the staff of life. In The Hunger Games, Peeta is beaten for throwing burnt loaves of bread to Katniss and her starving family. Miguel de Cervantes in Don Quixote gave an emotional comparison, saying ââ¬Å"All sorrows are less with breadâ⬠. For most people, a trip to France is incomplete without several stops to a bakery for a warm crunchy baguette or a buttery croissant. When the French are standing in a long line to buy their daysââ¬â¢ worth of bread, they are not just buying bread, but a piece of history as well. Bread was consumed by everyone in 18th century France. From King Louis XVI - who reigned France during this time, the clergy - religious leaders, the nobility- privileged class, the bourgeoisie- the upper middle class, and the peasants- the poorest and least powerful. However, it was different for the peasants. They made up over 85% of the population in France, but they struggled the most. Peasants stood in long lines to buy pieces of bread that were worth more than half of their wages. Bread wasnââ¬â¢t just the ââ¬Å"staff of lifeâ⬠for most peasants in the pre-industrial era; it was life itself. In the 18th century, peasants revolted against the government because there werenââ¬â¢t enough grains, and its prices were too high. Bread, or the lack of, was a political, societal, and economic cause that led to the French Revolution in 1789. To start off, the control on bread was a politicalShow MoreRelatedThe French Revolution And The Revolution Of The Bastille1221 Words à |à 5 Pageswould shake a nation. This event further altered the country of Franceââ¬â¢s history and drastically changed its future. This event was known as the Storming of the Bastille, the first violent instance to instigate the French Revolution and the formation of a rebel alliance to overthrow French monarchy. However the motives of the renegades is far and wide. The question must be asked; What were the major reasons for the French Revolution? Many elements of Franceââ¬â¢s infrastructure were created to suppress theRead MoreThe French Revolution And The American Revolution1408 Words à |à 6 Pages The French Revolution Salahaldin Bileh History 101 Professor Manley October 7, 2015 Throughout history, there have been many Revolutions. The French Revolution was a revolution that changed France history completely. The French Revolution did not only changed history, but changed Franceââ¬â¢s historical monarchy government to a more republic government. The poor French citizens got the courage to start a revolution from the American Revolution. The French Revolution started at 1789Read MoreWhat Caused The French Revolution?917 Words à |à 4 PagesWhat caused the French Revolution? Many things contributed to it evolving. But only three were the most important. The influence dates back all the way to the Age of Enlightenment, the ideas definitely had an effect on the French citizens. The American Revolution ties with the Enlightenment as well. The political inequality of the three estates played a huge part in the disruption. In addition to that, the Economic inequality also influenced France. The French Revolution is a big and memorable partRead MoreThe Debate On The French Revolution Essay1404 Words à |à 6 PagesThe Debate on the French Revolution For the French Revolution, the historians are mainly entangled in the debate between two different interpretations. The Marxists recognize the French Revolution as the conflict between the old order (feudal system) and the modern society. On the other hand, the revisionists consider the French Revolution as essentially a political revolution, instead of a bourgeois revolution. From my perspective, the French Revolution is a combined consequence of both economicRead More Everyday Life in Sixteenth Century France Essay1068 Words à |à 5 Pageslifestyle in France, just like in all other European countries, has changed dramatically since the early 1700ââ¬â¢s. People went from farmers to factory owners to all of the professions of todayââ¬â¢s society. The main reason for the great changes in lifestyle that occurred in France was the Industrial Revolution, which urbanized most of France. But the Industrial Revolution was not the only thing that changed France. The monarchy fell the church changed, and the role people had in their jobs and family life changeRead MoreFrom 1789 to 1799, Who Posed the More Dangerous Threats to the French Revolution: Its External Enemies or Its Internal Enemies?891 Words à |à 4 Pagesof modern European History: the French Revolution. The French population went through economic chaos, a dictatorship, and a civil war as well as other dramatic changes. During these years, the French decided to speak up for themselves and they became enemies of the French revolution. Internal enemies included the King, Louis XVI, Monarchists and Royalists and the Churches that were run by refractory priests. External threats were caused by aristocrats who had fled the Revolution; more specificallyRead MoreFrom 1789 to 1799, Who Posed the More Dangerous Threats to the French Revolution: Its External Enemies or Its Internal Enemies?880 Words à |à 4 Pagesof modern European History: the French Revolution. The French population went through economic chaos, a dictatorship, and a civil war as well as other dramatic changes. During these years, the French decided to speak up for themselves and they became enemies of the French revolution. Internal enemies included the King, Louis XVI, Monarchists and Royalists and the Churches that were run by refractory priests. External threats were caused by aristocrats who had fled the Revolution; more specificallyRead MoreHow Bread Has Improved With New Technology1549 Words à |à 7 Pages Matthew Henry once said, ââ¬Å"Here is bread, which strengthens man s heart, and therefore is called the staff of Life.â⬠Bread in many perspectives is the staff of life; it has come a long way with each step evolving into something new; evolving into over two hundred types of bread that are sold worldwide. Bread, born from the minds of humans, to turn a grain into flour, unite it with liquids and toast them over hot stones, is revolutionary. Bread has evolved into impacting our culture, religion, andRead MoreFrench Revolution: the Solution to Class Inequality1141 Words à |à 5 Pages The French Revolution was one of the most important events that occurred in the history of France. The revolution crumpled the Old Regime and completely transformed the social and political system of France. The people of France sought to establish a more egalitarian society through their newly created Republic. When Enlightenment thinkers such as John Locke, Jean-Jacques Rousseau and Baron de Montesquieu introduced individual liberty, natural rights and equality the ideas of revolution emergedRead MoreThe French And American Revolutions Essay1369 Words à |à 6 Pagesregarding the causes and circumstances between the French and American Revolutions existed due to the people and ideas of the day, but ultimately, they were motivated by different concerns. Americans wanted to be a sovereign nation and the French nationals were revolting against years of oppression and social inequity between the classes. The main causes of the French and American Revolutions will now be listed respectively: FRENCH REVOLUTION: 1. Financial/Economical In the 1700ââ¬â¢s, France was
Tuesday, December 17, 2019
The Enlightenment On The Creation Of A Thriving Society
Tanika Wolff, Group 1 ââ¬Å"Central to the Enlightenment is the notion that equality of educational opportunity is essential to the creation of a flourishing society. Discuss with reference to both a liberal and a conservative perspectiveâ⬠The driving force of the 18th century Enlightenment was to liberate individuals from the oppression of religion. To challenge the despotism of the traditional absolutes, it was imperative that the people were liberated from their dependence on various hegemonies so that they need not rely on such institutions for guidance. In order to do so, individuals needed to mature their intellect, relying on reason and rationality to venture towards autonomy. Consequently, education of the people became crucial in theâ⬠¦show more contentâ⬠¦Through analysing the beliefs at the core of the two polar political ideologies, it can be concluded that liberalism has a more conceivable notion of the foundations inherent to a prosperous society. As a political ideology, conservatism is defined by the desire to conserve and is reflected in a suspicion of political and social change. Conservatives venerate tradition as it is seen to generate social cohesion by linking people to the past and providi ng them with a sense of identity. Conservatives interpret society as a living entity, which is hierarchical by nature and characterised by established social gradations. Thus when reflecting upon society with a conservative perspective, genuine social equality is but a myth, rejected as undesirable and unachievable. Central to this ideology is the notion that inequality of wealth is inevitable, and is justified through the correspondence of differing social responsibilities. Burke a political philosopher who challenged the French Revolution as destructive and counter-productive believed Europe was already representing a flourishing society when the Revolution began. Burke argued that it was not enough to be free, life needed meaning and such could be found in tradition, folklore and myth. In Reflections on the Revolution in France (Burke, E 2004)i, Burke alludes to his position on education, claiming ââ¬Å"there ought to be a system of manners in every nation which a well formed mind to be disposed to relishââ¬â¢ (Burke, E
Monday, December 9, 2019
Essay on Commercial Law of Thermomix Appliance
Question: Discuss about the Commercial Law for Thermomix Appliance. Answer: 1. In case of the provided scenario of Thermomix Appliance it can be noticed that due to the faulty products produced by the company and in spite of informing the company the users or the consumers had to face number of injuries. Some of the mentionable injuries include case 16, January 2015, where the lid of the product blew off that resulted in causing burns to neck, face, arm, and chest. In this mentioned case TM5 model caused the injury. Similarly for case 68, the machine vibrated, became disordered which caused the led to blow off, the consequence of which was explosion of the soup the user was preparing and received second degree burns on the face. On informing the company there was not further response. There are other, number of accidents that had occurred due to the faulty product of Thermomix Appliance. This makes the company tortuously liable to the users for their injuries and suffering as the basic ground of liability in tort of negligence (Austlii, 2002). It needs to be mentioned here that, a legal wrong a legal wrong committed on the part of an entity or on the part of an individual against another entity or a person, for which an award of damages is the remedy can be stated as tort. In this context, it needs to be highlighted that on the part of plaintiff it is required to prove that there was negligence on the part of the defendant, which caused the injuries. This makes it essential for the plaintiff to prove the presence of all the elements that caused the damages. These elements include -duty, breach of duty, cause in fact, proximate cause and damages. In the provided scenario, it can be noticed that on the part of Thermomix Appliance, it owed to the users as duty of care at law of providing safe and effective products to the users. The company breached the duty by failing to meet care standard as required by the law by providing the products that are not faulty to the users. Most importantly, due to the breach of duty on the par t of the organization the users had to suffer major damages like second degree burns in case 52, face, arm and chest burns in case 62 (Choice, 2016). This fact clearly establishes the fact that Thermomix Appliance is tortuously liable to the users. It is mentionable here that under Civil Liability Act 2003 Chapter 2 as well the organization is liable to the injured users. Under Chapter 3 of the act the users can claim damages for the pain and suffering (legislation, 2016). As already mentioned, on the basis of the above provided facts of the incident that the company manufacturer is tortuously liable to the users, makes them entitled for remedies for the pecuniary and non- pecuniary loss which includes monetary compensation. On the part of the courts, along with the monetary compensation it can grant injunctions in order to restrain or restrict some attempted breaches or breaches in association to the consumer protections provisions. It is essential to discuss here that, for the pain and suffering the injured users can claim for compensatory damages. For the medical expenses and expenses associated with the damage of property or treatment of injury also the users can make claim for the damages and expenses. The users (i.e. the plaintiff) are further entitled for compensation for any income loss due to damage or injury. The expenses that may occur in the future for the treatment of the injury or repairing the damaged property can also be claimed by them . Under Competition and Consumer Act 2010 Schedule 2 also the company is liable to the users. Schedule 2 Part 3-3 of the act deals with safety of product related services and consumer goods. Part 4-3, Schedule 2 of the act state the offences associated with non- abidance by the safety of product related services and consumer goods and the remedies that the aggrieved party is entitled to (Austlii, 2012). Section 194 of the act states that, supplying consumer goods that fail in complying with the safety standards, is an offence. In the provided case as well, it can be noticed that noticed that the products provided to the users are faulty, which resulted in the occurrence of the injuries. This resulted in the breaching of Competition and Consumer Act 2010. The remedies that are users are entitled to under the act are $1,100,000 as the compensation amount. 2. The deadline in order to file a lawsuit can be referred as Statute of Limitations. In the context of filing lawsuits, most of the lawsuits require it to be filed within a specific amount of time. In cases where statute of limitations runs out the validity of the legal claim expires as well (Courts, 2010). The type of legal claim determines the time period in which a lawsuit can be filed. Hence it can be stated that, the law that fixes the time limit on the basis of a certain starting point, in the period of which legal action in order to determine liability is permissible can be termed as statute of limitations (Boeschen, 2012). Territory, national and state law, legalizes liability in Australia. The limitation period that are provided, as already mentioned depends on issues of the cases. For instance in case of product liability, which is the main issue in the provided case, according to Fair trading Act 2003, 6 years following the date of cause of action when it builds up is the limitation period. Similarly, in case of misleading and deceptive conduct, According to Australian Competition and Consumer Act 2010, 3 years from the date of discoverability of death or injury is the limitation period or 12 years long-stop period for the death or injury is also another part of limitations period under the act. It is mentionable here that the limitation period for the claims varies from region to region. As instance in case of personal injuries, the limitation period under Limitation Act 1969 is 3 years from the discoverability date or 12 years from the omission or act, whichever first expires in case of New South Wales. While in case of Queensland, under Limitations of Action Act 1 974 the limitation period is 3 years. Under Limitations Act 2005 the limitations period is 3 years from the date when an individual becomes aware of the fact that injury has occurred or sustained the inflicted personal injury or the first symptom of or manifestation of the injury for Western Australia (Austlii, 2005). It also requires to be mentioned here that in certain cases there exists provision for extension of the limitation period. As an instance in case of Victoria, for personal injury, under Limitations Actions Act 1958 any period is, reasonable and justified. Hence on the basis of the above discussion, it can be stated that the existence of the statute of limitations primarily exists in order to protect the defendants. An in depth analysis of this aspect reflects the fact that in order to determine rational diligence on the part of the plaintiff while approaching and incorporating on the part of the plaintiff valid cause of the action is one of the prime reason for the existence of statute of limitations. Other than that, in order to deal with the aspect of lost evidence on the part of the defendant in order to disprove a claim that is stale statute of limitations is also required. It also highlights upon the aspect of long-dormant claim that results in more cruelty rather than justice also makes the presence of statute of limitations necessary. There may occur cases when the plaintiff misuses the providing of claims, in order to prevent it also plays crucial role (Vargo, 2014). There may, arise cases where the defendant was not aware of the occurrence of the incidents of injuries. In such cases as well the statute of limitations acts as a safeguard for the defendant. 3. The statutory rules in order to deal with the claims of liability associated with damages or loss, which includes economic loss as well, that is the consequence of the supplied goods containing a safety defect is dealt with in Chapter 3, Part 3-5 of the Australian Consumer Law. In situation when an individual suffer injury or loss due to the supply of defective goods may take action against the manufacturer. In the provided case of Thermomix Appliance, it can be noticed that due to supplying, on the part of the manufacturer, products that do not comply with the safety standard, thus defective in nature resulted in severe injuries as it can be seen in case 73 of the scenario where the machine exploded hot liquid and resulted in burns to arms, stomach and chest of the user. It clearly highlights upon the fault on the part of the provided product and its defective nature which resulted in the injury. This is applicable for the other cases as well; hence making the users entitled to b ring a liability action against a manufacturer under Sections 138-141 of the act. The grounds under which the users can be bring a liability action against a manufacturer under sections 138-141 of the act are: due to the defective goods the users had to suffer damage or loss as a consequence of sustained injuries (Alrc, 2013). Other than that, in cases where due to another good being damaged or destroyed as a result of the defective goods which resulted in the suffering of damage or loss on the part of user also can be a basis for bringing a liability action against a manufacturer under sections 138-141 of the act. In addition to it, if due to a building, land or fixture getting damaged or destroyed because of goods defective in nature that resulted in damage or loss of individual, under Chapter 3, Part 3-5 of the Australian Consumer Law, the users have a basis of bringing a liability action against the manufacturer (Sec 138-141 of ACL). Hence on the basis of the above mentioned gro unds of the sections 138-141of Australian Consumer Law the users can sue the manufacturer in the court. However, the manufacturer can have defenses under sections 142 148 of ACL. The defenses that a manufacturer can have under 142 148 of ACL are: at the time when the goods were supplied the particular safety defects that occurred were absent. Further if the defendant can establish that only because of complying with a mandatory standard the defect occurred then also it will act as a strong defense for the manufacturer, which he can claim under sections 142 148 of ACL (publications, 2016). Further, if the manufacturer can prove under the mentioned sections, that the manufacturer was unable to detect the defect due to the lack of capacity of the state of technological and scientific knowledge, it will also act as effective defenses for the manufacturer. Another mentionable defense for the manufacturer under the mentioned sections are occurrence of the defect because the product was part of another good and it was due to the packaging or design of that other good that resulted in the d efect. Hence on the basis of the above mentioned defenses as mentioned under Sections 142 148 of the act if the manufacturer i.e. Thermomix Appliance can establish that the incidents associated with cases like shooting out of the measuring cup as seen in case 51, malfunctioning of the lid in case 60 or explosion of the machine as in case 73 were not associated with the fault of the manufacturer that results in the faulty product and associated injuries (Choice, 2016). Instead, by stating that at the time of supply of the good the safety defect was not present or due to abiding by mandatory standard the defect occurred or the technological knowledge did not empower the manufacturer to detect the defect or as the product was a part of another good and it as the designing or packaging the manufacturer can defend himself/herself under sections 142 and 148 of ACL (Claytonutz, 2012). References Alrc.gov.au. (2013).Damages | ALRC: Remedies and Costs. [online] Available at: https://www.alrc.gov.au/publications/12-remedies-and-costs/damages [Accessed 16 Sep. 2016]. Alrc.gov.au. (2014).The right to sue in tort | ALRC. [online] Available at: https://www.alrc.gov.au/publications/right-sue-tort [Accessed 16 Sep. 2016]. Austlii.edu.au. (2002).Public Tort Liability: An Alternative to Tort Liability and No-fault Compensation. [online] Available at: https://www.austlii.edu.au/au/journals/MurUEJL/2002/45.html [Accessed 16 Sep. 2016]. Austlii.edu.au. (2005).LIMITATION ACT 2005. [online] Available at: https://www.austlii.edu.au/au/legis/wa/consol_act/la2005133/ [Accessed 16 Sep. 2016]. Austlii.edu.au. (2012).COMPETITION AND CONSUMER ACT 2010 - SCHEDULE 2The Australian Consumer Law. [online] Available at: https://www.austlii.edu.au/au/legis/cth/consol_act/caca2010265/sch2.html [Accessed 16 Sep. 2016]. Boeschen, C. (2012).Damage Caps and Other Limits on Personal Injury Compensation - AllLaw.com. [online] AllLaw. Available at: https://www.alllaw.com/articles/nolo/personal-injury/damage-caps-limits-compensation.html# [Accessed 16 Sep. 2016]. Choice. (2016).Consumer advocacy - CHOICE: MASS INCIDENT REPORT TO THE ACCC Consumer report. [online] Available at: https://www.choice.com.au/campaigns [Accessed 16 Sep. 2016]. Claytonutz. (2012).The Australian Consumer Law An essential guide for product manufacturers and suppliers November 2012. [online] Available at: https://www.claytonutz.com/ArticleDocuments/178/Clayton-Utz-The-Australian-Consumer-Law-An-Essential-Guide-For-Product-Manufacturers-And-Suppliers-2012.pdf.aspx?Embed=Y [Accessed 16 Sep. 2016]. Claytonutz. (2016).PRODUCT LIABI. [online] Available at: https://www.claytonutz.com/ArticleDocuments/501/16_ProductLiability.pdf.aspx?Embed=Y [Accessed 16 Sep. 2016]. Courts.ca.gov. (2010).Statute of Limitations. [online] Available at: https://www.courts.ca.gov/9618.htm [Accessed 16 Sep. 2016]. legal.thomsonreuters. (2010).Product Liability. [online] Available at: https://legal.thomsonreuters.com.au/product/AU/files/720502336/chapter_23.pdf [Accessed 16 Sep. 2016]. legislation.qld.gov.au. (2016).Civil Liability Act 2003. [online] Available at: https://www.legislation.qld.gov.au/LEGISLTN/CURRENT/C/CivilLiabA03.pdf [Accessed 16 Sep. 2016]. Out-law. (2011).Product liability for negligence. [online] Available at: https://www.out-law.com/topics/commercial/supply-of-goods-and-services/product-liability-for-negligence/ [Accessed 16 Sep. 2016]. Out-law. (2011).Product liability under the Consumer Protection Act. [online] Available at: https://www.out-law.com/topics/commercial/supply-of-goods-and-services/product-liability-under-the-consumer-protection-act/ [Accessed 16 Sep. 2016]. productsafety.gov.au. (2013).Product Safety Australia. [online] Available at: https://www.productsafety.gov.au/contact-us [Accessed 16 Sep. 2016]. publications.qld.gov.au. (2016).The Australian Consumer Law A guide to provisions. [online] Available at: https://publications.qld.gov.au/dataset/1b96f0f9-1d84-44b4-9448-7d871dbd3b9d/resource/a9a1cc75-3b45-44fb-a08d-33d1e6ac7c10/download/aclguidetoprovisions.pdf [Accessed 16 Sep. 2016]. Vargo, T. (2014).Statute Of Limitations (Statute-Barred Debts) In Australia | InfoAviator. [online] Infoaviator. Available at: https://infoaviator.org/finance/credit/bad-credit-in-australia/statute-of-limitations-au/2014/11/23/statute-of-limitations-statute-barred-debts-in-australia/ [Accessed 16 Sep. 2016]. WA, L. (2015).Personal injury. [online] Legalaid.wa.gov.au. Available at: https://www.legalaid.wa.gov.au/INFORMATIONABOUTTHELAW/BIRTHLIFEANDDEATH/PERSONALINJURY/Pages/PersonalInjuryGeneralInformation.aspx [Accessed 16 Sep. 2016].
Sunday, December 1, 2019
Volpones weakness Essay Example
Volpones weakness Paper It is debatable, however, that Moscas manipulative personality would make him the dominant character without Volpones weakness of character as, on several occasions, when Volpone is thinking for himself Mosca influences his thoughts for his own gain and takes control of the situation. Jonson shows this immediately in the play, as Volpone initially leads the conversation in Act 1 scene I, but Mosca soon takes control, flattering Volpone with claims of what he believes him to be. When Mosca states that riches area greater good than wisdom Volpone agrees partway, but says he glories more in the cunning purchase ofwealth than in the glad possession, so it appears he is the most leading of the pair, but Mosca seizes this and praises Volpones indulgence, using such analogies as a merchant with rich Candian wines who drinks the lees of Lombards vinegar. He praises Volpone again for his generosity, claiming that he dare give from the bright heap of his gold to Mosca, his poor observer This is not only seen with Volpone, but Mosca also uses his covertly persuasive methods to influence Corvino, making him too believe he is in control. We will write a custom essay sample on Volpones weakness specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Volpones weakness specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Volpones weakness specifically for you FOR ONLY $16.38 $13.9/page Hire Writer Volpone leads conversation and then Mosca takes controlà Unnecessary flattery leading to being given moneyà Makes them think theyre in controlà Uses similar techniques on Corvino, despite already being shown to be an impossible task, and wins Celia for Volponeà Despite Moscas calculating nature and his clear skill in manipulating the clients and, to some extent, Volpone, he is dependent on Volpone for a home and his livelihood and therefore, on a larger scale, it is Volpone who is the dominant character, providing the situation and means for Mosca to carry out his deceptions. Socially, Mosca will always be the lesser of the two, but his furtive dominance is achieved through his personality, as seen in his control of Volpone and the clients. His lower social class also acts as a cunning guise, gulling others into believing his is incapable of influencing them for his gain due, particularly due to his having little or no formal education. It is therefore in personality that we see Mosca as the dominant partner, and it is this aspect of the characters that is overtly focused on in the play. Volpone would be incapable of his cunning purchase ofwealth without Mosca, and Mosca, as a parasite, needs Volpone to support himself and live. Although unbalanced, there is an element of co-dominance and dependence in Volpone and Moscas relationship, with Mosca dependent on material goods, and Volpone dominant in this area, yet dependent on Moscas personality attributes, making Mosca the more dominant in their relationship.
Tuesday, November 26, 2019
Friendship Poem â⬠poetry
Friendship Poem ââ¬â poetry Free Online Research Papers Friendship Poem poetry I think i found a friend, who will be there till the end. Who seemd to turn my life around, who picks me up when i am down. I never thought such a friend existed, where your feelings arnt restricted. Where you can say how much you care and that you will always be there. When no matter what happens you always know, your friendship will always grow. How nothing can tear you two apart and every word comes from the heart. I thought a friend like this came only in your dreams but thats not the way it seems. Its hard to believe but believe it or not, this is something ive actually got. Someone who never gave up on you and enourages whatever you do. Where their faith in you is always strong, even if its right or wrong. People spend their lives taking every risk, to find a friendship as strong as this. I cant believe in such a short time, i have already found mine. If you cry i cry thats the way it goes, how close we are nobody knows. Well still be close when were old and grey, still talk to eachother everyday. I cant imagine life with out you for a while coz id miss everything about you even your smile. I feel so alone when you are not here, coz to me your someone very dear. This is something no one could replace, not even that smile upon my face. You mean so much i just cant explain, how youve taken away so much pain. You made my world the best it could be, just by saying you love me. I know you feel the same as i do you, only because our friendship is something very true. Research Papers on Friendship Poem - poetryThe Fifth HorsemanMind TravelHip-Hop is ArtCapital PunishmentAppeasement Policy Towards the Outbreak of World War 2Personal Experience with Teen PregnancyHarry Potter and the Deathly Hallows EssayThe Spring and Autumn19 Century Society: A Deeply Divided EraThe Relationship Between Delinquency and Drug Use
Saturday, November 23, 2019
5ÃÂ top customer service jobs for 2018
5à top customer service jobs for 2018 Are you looking for your next great job opportunity? If so, then you may want to consider a position in customer service. Itââ¬â¢s a growing field with lots of opportunities in a variety of industries and settings, and the great news is that as a customer service professional youââ¬â¢ll build key transferable skills that you can use across the industry and even in other professions if you ever decide to make a major career change in the future. Need more reasons to consider pursuing a customer service job? According to the most recent Occupational Outlook Handbookà published by the Bureau of Labor Statistics, job openings for customer service representatives span nearly every industry imaginable and are projected to grow approximately 5% over the next decade. There are positions available in a variety of settings, including telephone call centers, offices, and retail stores, and both full-time and flexible part-time positions are possible. In addition, on-the-job training is often provided for individuals interested in pursuing employment in the field.The following are five of the most promising customer service jobs, based on available opportunities and forecasts for projected growth over the next several years.1. Computer support specialistAre you a whiz with computers and enjoy helping people? If so, then consider a position as a computer support specialist. These customer service professionals provide guidance and assistance to individual computer users, companies, and organizations. They help troubleshoot problems, support computer networks, and provide technical assistance as needed.Although the majority of computer support specialists work in full-time positions, there are a variety of different opportunities and arrangements available, including part-time work, contract work, and overnight work. Most professionals in the field have extensive computer experience and a college degree. The typical salary range for computer support specialists is be tween $49,000 and $63,000, depending on your location, industry, and experience level. Good news- the field is expected to grow approximately 10% over the next decade, and since individuals and companies routinely upgrade their computer equipment and software, you can count on there always being a need for qualified individuals.2. Financial clerkDo you have an interest in working in finance? Although financial clerks typically hold support roles in the industry, if you have a capacity for numbers and an interest in the world of finance, then perhaps a position as a financial clerk is a good idea for you. Financial clerks are typically responsible for handling the administrative responsibilities of the organizations that employ them, including recordkeeping, customer assistance, and basic financial transactions.Most financial clerks are employed in full-time, 9-to-5 positions and are found in bank branches, government agencies, and medical offices, as well as a variety of other indus tries. Educational levels for financial clerks can vary depending on the field and responsibilities of the role. The average salary for a financial clerk is approximately $38,000 and can vary depending on location, industry, and experience level. Over the next decade, the employment outlook for financial clerks looks promising, with growth around 9% expected over the next decade.à 3.à Information clerkIn many ways information clerks serve as the backbones of the companies that they work for, providing vital services such as record-keeping and maintenance, data collection, customer assistance, and more. Nearly every industry employs information clerks to help them operate efficiently, so if you choose to pursue a job in this field youââ¬â¢ll likely encounter a wealth of opportunities.Most information clerks are employed in full-time positions; education levels required to enter the field can vary depending on the responsibilities of any given role. The average salary range for an information clerk is approximately $32,000 and can vary depending on location, industry, and experience level. Over the next decade, the employment outlook for financial clerks is expected to grow around 3% over the next decade.à 4. Insurance sales agentDo you have an interest in working in the insurance industry? If so, then pursuing a position as an insurance sales agent might be a good goal for you. Agents often work on the front lines and serve as the crucial primary point of contact with customers who are interested in obtaining various types of insurance products. In addition to explaining the options available to them, agents answer questions and provide guidance during the entire process- which hopefully ends in customers obtaining the right insurance plans to meet their needs.Insurance agents typically work full-time positions in office settings and travel as needed to meet with clients. Typically, a high school diploma or some level of college is required to enter th e field. The average annual salary for an insurance agent is right around $50,000, and the long-term outlook for the field is promising- employment is expected to grow around 10% over the next decade.5. Wholesale and manufacturing sales representativeA great option for those looking to establish roots in the customer service industry is to go after a position as a wholesale and manufacturing sales representative. Individuals employed in this role typically sell products for wholesalers or manufacturers to other businesses or organizations. Theyââ¬â¢re expected to handle a wide array of customer service responsibilities, from serving as the primary point of contact to answering questions, to enticing potential customers, to negotiating prices.Individuals in this field often work on a commission basis; although they constantly feel the pressure of meeting a sales quota, salaries for successful sales representatives can make the effort worthwhile. The typical salary range for wholes ale and manufacturing sales representatives is between $57,000 and $79,000, depending on the type of products sold, location, industry, and experience level. Typically, a high school diploma or some level of college is required to enter the field for non-technical product sales; for more technical or scientific product sales, a college degree is typically needed. Long-term outlook for the field is promising- employment is expected to grow around 6% over the next decade.If you think a job in the customer service field might make sense for you, consider pursuing a position in one of these five top customer service jobs- each has an excellent outlook for 2018 and the foreseeable future. Good luck!
Thursday, November 21, 2019
Obesity and Diabetes ( Obesity is known to cause diabetes Essay
Obesity and Diabetes ( Obesity is known to cause diabetes - Essay Example Lichtarowicz [2004] studies that ââ¬Å"More than 22 million children under five years old are obese or overweight, not only from affluent countries. Over 17 million of them are in the developing world. Each one of these children is at a much higher risk of developing type 2 diabetesâ⬠. To make the statement stronger the link that exists between type ii diabetes and obesity has been proved strappingly by genetist James Neel in 1962 says Marchand [2006]. In a research conducted by NIDDK, the already existing fact was proved that 95% of the Prima Indians with diabetes are found to be obese. They applied the ââ¬Å"thrifty geneâ⬠theory of James Neel to investigate and realize the link that existed between diabetes and obesity. With the help of the theory NIDDK found out the fact that Prima Indians were habituated towards eating plenty of food with fat content, and hence resulted in obesity as a genetic problem which further ended up in diabetes for many who engaged in less physical activities. The U.S.Center for Disease Control has observed, ââ¬Å"Occurrences of Obesity and diabetes increased in the United States between 2000 and 2001â⬠. Their study helped in identifying the connection between overweight and obesity with diseases like diabetes, blood pressure, arthritis etc. The U.S. Center for Disease Control say that ââ¬Å"those with a body mass index of 40 or higher had an increased risk of being diagnosed with diabetes (7.37 times greater)â⬠. The connection between obesity and diabetes is that, if a body gathers more weight in terms of fat and if it does not involve in physical activities results in body maintaining the excess weight. Thus, ââ¬Å"being overweight is one of the main risk factors for type ii diabetes. The more fatty issues you have, the more resistant your cells become top your insulinâ⬠reports Mayo Clinic [2006]. Maintaining the glucose level by eating food items with less fat
Subscribe to:
Posts (Atom)